Hey guys,
I've uploaded a video of Polarbear in action:
http://www.youtube.com/watch?v=WY4SNlla3zk
Still pretty fast, despite the imbalance!
Saturday, July 25, 2009
Telescope moves!
Richardson sent out a person yesterday to start on the servo, and I am happy to report that the telescope is now moving under it's own power. As you can guess, there are some issues. The biggest one is that we can only hit 80% of the spec velocity in elevation. This could be due to a number of things, like imbalance or excess force on the friction drive, but more on that later. I want to get Dave to make a movie with his new camera.
On another note, Nathan showed up also, and Dave is hoping that I will focus on him for comic relief.
On another note, Nathan showed up also, and Dave is hoping that I will focus on him for comic relief.
Friday, July 24, 2009
Photogrammetry
I have not posted in a long time because the last week had been grueling. I have been up all night in the dark for about five days, and I think I have finally recovered.
We did photogrammetry, and have had mixed results. The primary still appears okay, although I do not think that our setup is precise enough to see something subtle. The panels have also been aligned, except for one. The measurements were showing that one of the panels was off by 0.08 inches, while the rest were about 10X closer. Al came up with a way to suck down the bad panel, but in the process, he and Brian found that the panel was actually resting on the Primary.
After yanking the panel off, however, it sill looks like Al's contraption will have to be installed after all, a job for tomorrow.
But I am getting ahead of myself, we were hit by a couple of problems, the first was that it rained on almost every night, and we not only lost the time that it was raining, but I am also afraid that the mirror would do weird thermal drifting while drying.
In the end, we were not able to align the secondary. I think the problems were in both the software, and the adjustment mechanism. I think I will work on both, an then we will try again. They cryostat mount is still not here, so it is likely that Jay, the photogrammetry person, will have to come back in a few months to try again.
Pictures will be coming later
We did photogrammetry, and have had mixed results. The primary still appears okay, although I do not think that our setup is precise enough to see something subtle. The panels have also been aligned, except for one. The measurements were showing that one of the panels was off by 0.08 inches, while the rest were about 10X closer. Al came up with a way to suck down the bad panel, but in the process, he and Brian found that the panel was actually resting on the Primary.
After yanking the panel off, however, it sill looks like Al's contraption will have to be installed after all, a job for tomorrow.
But I am getting ahead of myself, we were hit by a couple of problems, the first was that it rained on almost every night, and we not only lost the time that it was raining, but I am also afraid that the mirror would do weird thermal drifting while drying.
In the end, we were not able to align the secondary. I think the problems were in both the software, and the adjustment mechanism. I think I will work on both, an then we will try again. They cryostat mount is still not here, so it is likely that Jay, the photogrammetry person, will have to come back in a few months to try again.
Pictures will be coming later
Thursday, July 16, 2009
Panels and countrerweight
The old counterweights were lifted into place this morning, and now the telescope is almost balanced. We will not know for sure until the torque is measured again. We are currently waiting on a connector before we can turn on the motors.

We have a resident underneath the telescope. We call him stumpy, for obvious reasons. He comes out and pecks at pebbles, but someday he will get a real bug. There are tons of these little lizards everywhere, and sometimes they will freak you out if you are not expecting it.

Brian worked on the panels for most of the day, and they are basically in the right spot. There is a fifth tab though, and some of these might need to be modified. We wont know if the panels are in the exact right spot until the photogrammetry is done, which should start this weekend.

This is how the telescope was left today, you can see the counterweights in the new location.

We have a resident underneath the telescope. We call him stumpy, for obvious reasons. He comes out and pecks at pebbles, but someday he will get a real bug. There are tons of these little lizards everywhere, and sometimes they will freak you out if you are not expecting it.

Brian worked on the panels for most of the day, and they are basically in the right spot. There is a fifth tab though, and some of these might need to be modified. We wont know if the panels are in the exact right spot until the photogrammetry is done, which should start this weekend.

This is how the telescope was left today, you can see the counterweights in the new location.
Wednesday, July 15, 2009
Old Photos
New tabs and counterweight
The internet in the super 8 has been out for the last two days, so I have not updated in quite a while. A lot has happened in the last couple of days.
Here is a photo of the shadow of the panels, right before they were removed. You can see tha the gap is a little bigger on one side. The panels just could n0t be mounted in the correct position, so it meant that the panel tabs on the support needed to be reworked.

It also turns out that Caltrans is doing major road work on 168. Every time we go up and down, we have to wait about 20min for a "pilot" car to lead us around the crew.


Al is also relocating some of the counterweights to balance out the primary. It tuns out that the CG is only 3inches off, but at 30,000lbs, 3 inches means a lot of torque. Here is a monster tap that Al is using to mount the threaded rod into some 3" thick plate .

The panels have all been sadly removed, and they are all sitting in this box.

On Tuesday, the hard work began of drilling and tapping for the counterweights, and welding the new tabs. I had to get a burn permit from the Bureau of Land Management, and we have to keep this awesome backpack super-soaker around to fight fires. Al and Brian are working both ends of the telescope.

Here are the new tabs that have been fabricated.

Drilling through 3" of steel plate leaves a lot of shavings.

All the drilling and tapping is mostly done now, the tabs are all welded on, and Marius is now painting the saddlebags. The Photogrammetry needs to start next week, so we are scrambling to be ready.
Here is a photo of the shadow of the panels, right before they were removed. You can see tha the gap is a little bigger on one side. The panels just could n0t be mounted in the correct position, so it meant that the panel tabs on the support needed to be reworked.

It also turns out that Caltrans is doing major road work on 168. Every time we go up and down, we have to wait about 20min for a "pilot" car to lead us around the crew.


Al is also relocating some of the counterweights to balance out the primary. It tuns out that the CG is only 3inches off, but at 30,000lbs, 3 inches means a lot of torque. Here is a monster tap that Al is using to mount the threaded rod into some 3" thick plate .

The panels have all been sadly removed, and they are all sitting in this box.

On Tuesday, the hard work began of drilling and tapping for the counterweights, and welding the new tabs. I had to get a burn permit from the Bureau of Land Management, and we have to keep this awesome backpack super-soaker around to fight fires. Al and Brian are working both ends of the telescope.

Here are the new tabs that have been fabricated.

Drilling through 3" of steel plate leaves a lot of shavings.

All the drilling and tapping is mostly done now, the tabs are all welded on, and Marius is now painting the saddlebags. The Photogrammetry needs to start next week, so we are scrambling to be ready.
Friday, July 10, 2009
Dave's Turn
Albert and Brian are arriving super early these days, and they were able to check the balance of the telescope before we arrived. San Jose had requested that they do the standard balance test, by measuring the torque required to move the telescope at many different elevations. It turns out that the orientation seen below is the min torque, meaning that the center of mass is right above the elevation axis. The plan is to now add counterweights below the axis, and we are waiting for San Jose to make a recommendation.

There is a minor problem with the elevation cable wrap, it hangs on one of the counterwieght bolts.

Brian was able to rinse away all most of the residue from the recent rain. This photo also shows the current gaps in the panels. We are still waiting for a recommendation on how to deal with the panel hardware interference.


It was Dave's turn to crawl into the hole today to redo the shims. He spent half the time with his legs hanging out of hole, and just like in the cartoons, he kept kicking them around as he was squirming around in the the yoke.

He had to poke his head out once in awhile to let the blood drain.

We re-created the scene in the box for the blog.


Here's how we left the telescope today. It is in sad polarbear orientation, but I am actually happy that our problems are slowly getting resolved.

There is a minor problem with the elevation cable wrap, it hangs on one of the counterwieght bolts.

Brian was able to rinse away all most of the residue from the recent rain. This photo also shows the current gaps in the panels. We are still waiting for a recommendation on how to deal with the panel hardware interference.


It was Dave's turn to crawl into the hole today to redo the shims. He spent half the time with his legs hanging out of hole, and just like in the cartoons, he kept kicking them around as he was squirming around in the the yoke.

He had to poke his head out once in awhile to let the blood drain.

We re-created the scene in the box for the blog.


Here's how we left the telescope today. It is in sad polarbear orientation, but I am actually happy that our problems are slowly getting resolved.
Subscribe to:
Posts (Atom)


